Home / Wood Container - Occupations Duties

Wood Container - Occupations Duties

View related occupations duties grouped under the 'wood container' business sector.
Share on Facebook Share on Twitter Share on LinkedIn

Air and water Filler Occupation

Job Duties:

  • Inject compressed air water into barrels preparatory to inspection by Barrel Inspector, Tight wood
  • Drive rubber valve into bunghole, using hammer
  • Insert nozzle into valve and pulls lever to inject air water into barrel until specified pressure is attained within barrel as determined by automatic cutoff
  • Remove nozzle from barrel sets barrel aside for inspection
  • May taper bunghole prior to insertion of valve nozzle, using reaming machine
  • May inject air or water only be designated Air Filler wood
  • container , Barrel Waterer wood

Air and water tester Occupation

Job Duties:

  • Inject compressed air water into barrels preparatory to inspection by Barrel Inspector, Tight wood
  • Drive rubber valve into bunghole, using hammer
  • Insert nozzle into valve and pulls lever to inject air water into barrel until specified pressure is attained within barrel as determined by automatic cutoff
  • Remove nozzle from barrel sets barrel aside for inspection
  • May taper bunghole prior to insertion of valve nozzle, using reaming machine
  • May inject air or water only be designated Air Filler wood
  • container , Barrel Waterer wood

Assembler Occupation

Job Duties:

  • Assemble parts of wooden cases for use in carrying industrial tools equipment
  • Fasten wooden parts of case together with rivets or nuts bolts
  • Drill holes in precut metal strips screws strips to edges of case
  • Rivet hardware, like hinges, fasteners, and metal corners to case to complete assembly.

Assembling Inspector Occupation

Job Duties:

  • Inspect repairs wood boxes
  • Examine partially or completely assembled boxes and crates for defects, like cracks, nicks, holes and diagonally driven protruding nails
  • Remove diagonally driven nails drives in protruding nails, using hammer
  • Smooth rough spots edges, using sanding block or wire brush
  • May sort assembled boxes according to specified groups.

Bander Occupation

Job Duties:

  • Attach reinforcing metal bands to ends of wood boxes, using strapping tool
  • Thread strapping tool with metal band
  • Position band around ends of box
  • Pump handle of tool to tighten band
  • Pull lever on machine to crimp fasten band with metal clip.

Barrel assembler Helper Occupation

Job Duties:

  • Assist Barrel Assembler wood
  • container to assemble barrels, performing any combination of following duties
  • Start gas burner or oven to heat shells barrels without ends
  • Remove and replaces machine attachments, like croze cutter drill chucks
  • Replace worn sanding belts on sander
  • Perform other duties as described under Helper any industry Master Title
  • May be designated according to machine operator assisted as Croze-Cutter Helper wood
  • container , Head-Up-Operator Helper wood
  • container , Heater Operator Helper wood
  • container , Hoop-Driving-Machine-Operator Helper wood
  • container , Leveler Helper wood
  • container , Sander Helper wood
  • container , Truss-Driver Helper wood
  • container , Truss-Puller Helper wood

Barrel Brander Occupation

Job Duties:

  • Burn initials or trademark of manufacturer on staves or heads of barrel or keg
  • Lays barrel horizontally on carriage of brander and turns handwheel, raising carriage forcing barrel against hot iron
  • Turn handwheel to rotate barrel in carriage bring another stave in contact with iron
  • Lower carriage removes barrels when specified number of staves have been branded
  • May use hand-operated, gasoline-fired branding iron
  • May heat irons bearing single letter or mark apply irons to barrels
  • May stamp consecutive numbers on barrel staves to facilitate reassembly by customers.

Barrel bung remover And Dumper Occupation

Job Duties:

  • Empty water from barrel that has been inspected by Barrel Inspector, Tight wood
  • container or weighed, by rolling barrel onto stand pulling bung from hole by hand, or using bung puller.

Barrel Burner Occupation

Job Duties:

  • Burn interior of headless barrel or keg to prepare it for aging whiskey
  • Fits charring rings in each end of barrel to protect surface in which croze is to be cut
  • Fire gas burner or fire pot containing wood scraps shavings and places barrel over flame
  • Cover top end of barrel with metal plate allows burning to continue for specified period, according to depth of char desired
  • Remove plate quenches burning interior with wet mop or spray from hose
  • May use device equipped with lever to lower metal hood or exhaust chimney onto top end of barrel to create draft during charring timer that automatically raises hood or chimney when specified charring time has elapsed
  • May burn one side of whiskey barrelhead in oven or over fire pot be designated Head Charrer wood

Barrel Charrer Occupation

Job Duties:

  • Burn interior of headless barrel or keg to prepare it for aging whiskey
  • Fits charring rings in each end of barrel to protect surface in which croze is to be cut
  • Fire gas burner or fire pot containing wood scraps shavings and places barrel over flame
  • Cover top end of barrel with metal plate allows burning to continue for specified period, according to depth of char desired
  • Remove plate quenches burning interior with wet mop or spray from hose
  • May use device equipped with lever to lower metal hood or exhaust chimney onto top end of barrel to create draft during charring timer that automatically raises hood or chimney when specified charring time has elapsed
  • May burn one side of whiskey barrelhead in oven or over fire pot be designated Head Charrer wood



Home | About Us | Contact | Privacy Policy | Terms of Use

Copyright 2011 - 2019 - All Rights Reserved