Home / Abrasive Wheel Molder Job Tasks, Roles And Duties

Abrasive Wheel Molder Job Tasks, Roles And Duties

Looking for sample abrasive wheel molder job duties and responsibilities and related job titles, examples help to write job duties for abrasive wheel molder career. try our simply examples and save free.

Related Abrasive Wheel Molder Job Titles And Duties

Listed top related job titles and duties for "abrasive wheel molder" (abrasive, wheel, molder) or similar careers:

Abrasive wheel Molder: # JOB401980
  • Tends hydraulic press that molds synthetic abrasive disks, hones, and also grinding wheels.
  • Selects mold parts according to size thickness of wheel desired plus assembles parts to form mold.
  • Weighs out specified amounts of abrasive compound & adhesive or activates automatic hopper that dumps specified quantity of abrasive mix into pan, pours compound into mold on rotating turntable and additionally inserts bushings hubnuts in center of mold to form wheel.
  • Places top plate on mold, positions mold in press, and also turns valves as well as levers to close press start pressing cycle.
  • Removes pressed wheels from mold places wheels on bats (plate) for drying in kilns.
  • May stamp or mark code numbers on pressed wheels.
  • May mix grit, resin, and also clay to form abrasive compound, using mixing machine.
  • May be designated according to type of abrasive used as Diamond-Wheel Molder (nonmet.
  • min.); Emery-Wheel Molder (nonmet.

Chocolate Molder Machine: # JOB400794
  • Tends machine equipment that deposit tempered chocolate into molds to form bars, blocks, and also assorted figures.
  • Opens valves to draw chocolate from tempering kettle or automatic tempering equipment into water-jacketed depositor of molding machine.
  • Observes thermometer & turns valves to admit circulate water in jacket to maintain specified temperature of chocolate in depositor.
  • Adjusts piston stroke of depositor that forces measured amounts of chocolate into conveyorized molds, using handtools.
  • Turns handwheel to adjust speed of conveyor.
  • Weighs filled molds to make sure that weight of chocolate casts meet specifications.
  • Observes thermometer as well as turns thermostat valve to control temperature in cooling tunnel.
  • Observes action of machine to make sure that molds do not jam.
  • May temper chocolate [Chocolate Temperer (bakery products; grain-feed mills)]..

Machine Chocolate Molder: # JOB400794
  • Tends machine equipment that deposit tempered chocolate into molds to form bars, blocks, and also assorted figures.
  • Opens valves to draw chocolate from tempering kettle or automatic tempering equipment into water-jacketed depositor of molding machine.
  • Observes thermometer & turns valves to admit circulate water in jacket to maintain specified temperature of chocolate in depositor.
  • Adjusts piston stroke of depositor that forces measured amounts of chocolate into conveyorized molds, using handtools.
  • Turns handwheel to adjust speed of conveyor.
  • Weighs filled molds to make sure that weight of chocolate casts meet specifications.
  • Observes thermometer as well as turns thermostat valve to control temperature in cooling tunnel.
  • Observes action of machine to make sure that molds do not jam.
  • May temper chocolate [Chocolate Temperer (bakery products; grain-feed mills)]..

Toilet Products Molder: # JOB401458
  • Fills molds with heated mixture to form drug toilet products, like lipsticks, deodorant, and also eyeshadow sticks.
  • Pours or opens valve to admit mixture slowly into mold cavities to avoid forming bubbles.
  • Places mold on chilling plate or in refrigerator, or starts fan to cool congeal contents.
  • Scrapes excess material from mold, using spatula.
  • May open mold remove formed product.
  • May insert lipstick cases or other containers into molds to hold form product.
  • May pump or pour mixture into temperature-controlled kettle prior to molding to heat mixture to pouring temperature.
  • May be designated according to product molded as Lipstick Molder (pharmaceut.); Suppository Molder (pharmaceut.)..

Tire Molder: # JOB401334
  • Tends retreading mold that vulcanizes camelback (raw rubber tread) onto tire casing molds tread design.
  • Places air bag of specified size inside tire, using tire-spreading device plus clamps tire into mold.
  • Inflates air bag to specified pressure & heats mold to specified temperature to cook mold tread.
  • Removes tire after predetermined time trims loose ends from molded tread, using knife..

Pipe Covering Molder: # JOB401420
  • Tends equipment that fuses granulated polystyrene into pipe coverings, used for insulation.
  • Positions funnel into top of mold dumps or opens chute of overhead hopper to load specified quantities of material.
  • Removes funnel & adjusts stripper plate as well as cutter rim to make sure molding of material into specified sizes shapes.
  • Manually locks mold opens steam valve to admit heat.
  • Observes heat recorder adjusts valves to attain specified temperature to fuse materials for prescribed period of time.
  • Unlocks mold removes pipe covering, using hoist.
  • Moves product to storage area, using handtruck.
  • May mold special products, like toys games, and also be designated Specialty Molder (plastic prod.)..

Thermal Molder: # JOB401290
  • Tends steam heaters or presses that shape cure rubber floor mats.
  • Positions sheets of precut calendered rubber on molds.
  • Turns valve to activate vacuum fixtures that draw hold rubber against contours of molds.
  • Examines molds to ascertain that rubber sheet covers mold smooths out wrinkles.
  • Removes excess rubber from mold, using knife or roller.
  • Pushes switch to close press move heater carriage into heater.
  • Turns valve to admit steam sets timer for specified curing time.
  • Strips cured mats from mold.
  • Examines mats for defects, like discoloration, misforming, blisters, and also cracks.
  • Marks defective mats for repair places them on skids..

Molder Resin: # JOB401426
  • Seals as well as encapsulates magnetic, electrical, electronic, and also mechanical components of aircraft plus missile parts and assemblies in plastic other sealant materials, using handtools, power tools, and also equipment.
  • Mixes specified amounts of resins, curing agents plus fillers in container, according to formula, using spatula.
  • Cleans parts to be sealed encapsulated, using solvents, brush and additionally rags.
  • Positions component parts in molds pours or injects sealing compound into molds.
  • Places molds in preset oven for specified time to harden mixture around units.
  • Smooths finishes surfaces of hardened sealing compound, using scratch remover, files, sander, and also other work aids.
  • May apply protective coating to component parts by spraying or dipping parts in resin vat.
  • May engrave identifying symbols, letters, and also numbers on unit encasement, using pantograph engraving machine.
  • May inspect components prior to sealing encapsulating, using preset measuring devices.
  • May operate curing equipment.
  • May build temporary molds from metal, putty, plastic, and also other materials..

Rubber Molder: # JOB401428
  • Molds rubber display statuettes models of hands, feet, and also heads for attachment to display mannequins.
  • Brushes lubricant onto interior of mold.
  • Pours liquid rubber into mold until full.
  • Pours surplus rubber from mold after shell of rubber has formed on inside of mold.
  • Strips form from mold after rubber has set.
  • Trims edges of form, using knife smooths surface, using sandpaper..

Loader demolder: # JOB401429
  • Casts plastic furniture parts, using molds, furniture stock, and also plastic molding compound gun.
  • Conveys pallets loaded with furniture stock to work site, using industrial truck.
  • Places furniture stock inside specified mold, clamps mold to furniture stock and additionally places mold onto conveyor.
  • Inserts nozzle of molder gun between mold as well as furniture stock dispenses plastic compound into mold around furniture stock to cast plastic furniture parts, like edge bands.
  • Unclamps as well as removes cast parts from mold after specified setup time, using chisel knife..

1 | 2 | 3 | 4 | 5 >>